Quick answer
To get IP65 or IP67 testing in India, confirm the rating your buyer or application needs, send product specifications and drawings to a laboratory (directly or through a consultancy) for a quotation, agree the test scope, submit samples, and review the laboratory’s test report. IP65 and IP67 are tested under IEC 60529: both need dust-tight (6X) protection, but IP65 uses water jets while IP67 uses temporary immersion.
Manufacturers of LED luminaires, enclosures, connectors, industrial electronics and outdoor equipment are often asked for an IP rating by buyers, tender documents or distributors. The practical question is not only “what is IP65?” but “who tests it, what do they need from me, and will the report be accepted?” This guide answers those in order.
JS Certification is a certification and compliance consultancy. It coordinates product testing through third-party laboratories; it does not operate a laboratory, and the test report is issued by the laboratory that performs the tests.
What Are IP65 and IP67 Ratings?
IP stands for Ingress Protection. The code has two digits: the first covers solid particles including dust (0–6), the second covers water (0–9). The method for classifying and testing them is defined in IEC 60529, “Degrees of protection provided by enclosures (IP Code)”.
What does IP65 mean?
What does IP67 mean?
What is the difference between IP65 and IP67?
| Aspect | IP65 | IP67 |
|---|---|---|
| Dust (first digit 6) | Dust-tight | Dust-tight |
| Water test type | Water jets (IPX5) | Temporary immersion (IPX7) |
| Typical use | Outdoor fixtures, panels exposed to rain or hose-down | Products that may be briefly submerged, such as connectors or sensors near wet floors |
| Key limitation | Does not cover immersion | Does not automatically show IPX5 jet compliance |
Under IEC 60529, a product rated IPX7 is not assumed to meet IPX5 or IPX6 jet tests. If you need both, the product is tested and marked for both (for example IPX5/IPX7). Exact test parameters (nozzle, flow rate, depth, duration) should be confirmed against the current edition of IEC 60529.
Which Products May Need IP65 or IP67 Testing?
LED lighting
Street lights, flood lights and outdoor luminaires.
Enclosures and panels
Control panels, junction boxes, meter boxes.
Connectors and switches
Where sealing at the cable entry or contact is critical.
Industrial and outdoor electronics
Sensors, chargers, telecom and battery units.
Whether you need IP65, IP67 or another rating depends on the design, where the product will be used, the applicable product specification and what your customer asks for. Do not choose a rating only because it sounds higher.
How to Get IP65 or IP67 Testing Done in India
Laboratories differ in process, but most engagements follow this sequence.
Consultancy role
Laboratory role
Request an IP Testing Quote
Share your product type, intended application and required IP rating to discuss the applicable testing requirements and quotation process with JS Certification.
What Are IP65 and IP67 Ratings?
Exact requirements vary by product and by laboratory. Plan to have these ready:
- Model name, specifications and datasheet
- Technical drawings showing enclosure construction and seals
- Intended operating environment and target rating
- Dimensions and how the product is mounted in use
- The number of samples the laboratory requests, in production condition
- Test method, acceptance criteria and any extra requirement from your buyer
What Is the Cost of IP65 or IP67 Testing in India?
There is no single fixed price. Published listings vary widely, and a quotation should be specific to your product. These factors usually decide it:
| Cost Factor | Why It Matters |
|---|---|
| Product size and type | Larger or heavier items need different fixtures and tank or chamber capacity. |
| Rating requested | IP65 (jet) and IP67 (immersion) use different set-ups; dual ratings add tests. |
| Test scope | Dust only, water only, or both; pre-checks; functional checks after the test. |
| Number of samples | More samples or variants mean more test runs. |
| Logistics | Shipping, handling and sample return, where applicable. |
| Retesting | A failed sample re-tested after design changes is normally charged again. |
| Report requirements | Formats, copies or buyer-specific content, as quoted by the laboratory. |
Always compare quotations on inclusions, not just the headline figure: what is tested, how many samples, and which report is issued.
What Is IEC 60529 and How Does It Apply to IP Testing?
IEC 60529 is the international standard that defines the IP Code and the test methods behind it. Four things are often mixed up:
- Testing to a standard: the laboratory performs the IEC 60529 tests.
- A test report: the laboratory’s record of what was tested and observed.
- Product certification: a separate scheme-based approval that may rely on test reports.
- Regulatory or market acceptance: decided by the buyer, authority or importing country.
An IP test report is not a government approval, and acceptance varies by buyer or authority. Confirm what yours requires before testing.
How to Choose a Suitable IP Testing Laboratory in India
- It has the equipment for the digits you need (dust chamber, jet nozzle, immersion tank)
- It tests to IEC 60529 and can state the edition used
- If your buyer requires accreditation, ask for the current certificate and check that IP testing for your product is in its scope on the NABL website
- It shares a sample report format so you know what the report contains
- The quotation states inclusions, and turnaround time is confirmed in writing by the laboratory
Not every IP test needs an accredited laboratory. The requirement comes from your buyer, tender or receiving authority, so ask them first. For background, see our guides on what a NABL certificate is and NABL requirements for testing laboratories.
How JS Certification Helps Coordinate IP Testing
JS Certification helps you clarify the rating you need, organise product details, approach a suitable third-party laboratory and follow up the quotation. Related services include product testing coordination and electrical safety testing. For LED products, see our IS 10322:2026 guide for LED luminaires; for electronics, BIS CRS certification.
We do not guarantee that a product will pass, or that a report will be accepted by every buyer or regulator. Start from the IP testing service page or the contact page.
Frequently Asked Questions About IP65 and IP67 Testing
Confirm the rating you need, collect specifications and drawings, request a quotation from a laboratory or a coordinating consultancy, agree the test scope, submit samples, and review the report. Ask which laboratory performs the tests.
Both require dust-tight protection. IP65 tests water jets; IP67 tests temporary immersion. IP67 does not automatically prove jet protection, so products needing both are tested for both.
Usually the datasheet, drawings or cross-section, intended use environment, target rating and samples. The laboratory confirms its exact list, so request it with the quotation.
It depends on product size, rating, test scope, sample count, logistics and retesting. Prices are quoted per product, so request a written quotation and compare inclusions.
LED luminaires, enclosures, panels, connectors, switches, outdoor and industrial electronics. Need depends on design, use and buyer requirements.
It defines the IP Code and the test methods for degrees of protection that enclosures give against solid objects, dust and water. It does not itself certify a product.
Check equipment, the IEC 60529 edition used, accreditation scope if your buyer requires it, a sample report, and quotation inclusions. Confirm turnaround with the laboratory
Yes. A consultancy can manage requirements, documents and communication, while the laboratory performs the tests and issues the report. Check who issues the report.
It varies by laboratory schedule, product and test scope. Ask the laboratory for a written timeline, including time for sample receipt and report issue.
Send your product type, intended application, required IP rating and specifications through the IP testing page, and JS Certification will take it forward with a suitable laboratory.
Planning IP testing for your product?
Tell us the product, where it will be used and the rating you need. We will discuss the process and quotation with you.
